EPM7160STC100-6N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 149.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7160STC100-6N Overview
In the mobile phone network, there are 160macro cells, which are cells with high-power antennas and towers.The product is contained in a TQFP package.The device has 84inputs and outputs.There are 100 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.There are 100pins on the chip.In digital circuits, there are 3200gates, which act as a basic building block.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.It is designed with 100 pins.With a maximum supply voltage of [0], it operates.It is powered by 4.75Vas its minimum supply voltage.There are 84 Programmable I/Os.This frequency can be achieved at 166.7MHz.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.It is composed of 10 logic blocks (LABs).There should be a lower maximum frequency than 149.3MHz.It is possible to classify programmable logic as EE PLD.
EPM7160STC100-6N Features
TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160STC100-6N Applications
There are a lot of Altera EPM7160STC100-6N CPLDs applications.
- Pattern recognition
- Power automation
- DDC INTERFACE
- Field programmable gate
- Synchronous or asynchronous mode
- Cross-Matrix Switch
- Random logic replacement
- Software-Driven Hardware Configuration
- Multiple DIP Switch Replacement
- Software Configuration of Add-In Boards