EPM7160STC100-6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 149.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3200 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 10 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 160 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7160STC100-6 Overview
The mobile phone network has 160 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a TQFP package.As a result, it has 84 I/O ports programmed.It is programmed that device terminations will be 100 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 5V is used as the power supply for this device.It belongs to the family [0].In this chip, the 100pins are programmed.The 3200gates serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.A total of 100pins are provided on this board.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.75V is required for it to operate.There are a total of 84 Programmable I/Os.The frequency that can be achieved is 166.7MHz.The operating temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.In total, it contains 10 logic blocks (LABs).It is recommended that the maximal frequency be lower than 149.3MHz.A programmable logic type is categorized as EE PLD.
EPM7160STC100-6 Features
TQFP package
84 I/Os
100 pin count
100 pins
10 logic blocks (LABs)
EPM7160STC100-6 Applications
There are a lot of Altera EPM7160STC100-6 CPLDs applications.
- DDC INTERFACE
- I2C BUS INTERFACE
- Code converters
- Cross-Matrix Switch
- TIMERS/COUNTERS
- Wide Vin Industrial low power SMPS
- D/T registers and latches
- Programmable power management
- Custom shift registers
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management