EPM7128SQC160-15N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 76.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 147.1MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.07mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128SQC160-15N Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the PQFP package.It is programmed with 100 I/Os.160terminations are programmed into the device.The terminal position of this electrical component is QUAD.Power is provided by a supply voltage of 5V volts.This part is included in Programmable Logic Devices.160pins are programmed on the chip.This device is also capable of displaying [0].2500gates are used to construct digital circuits.High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.The device has a pinout of [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.A minimum supply voltage of 4.75V is required for this device to operate.A total of 100 Programmable I/Os are available.This frequency is 76.9MHz.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should not exceed 70°C.In its simplest form, it consists of 8 logic blocks (LABs).The maximum frequency should not exceed 147.1MHz.A programmable logic type can be categorized as EE PLD.
EPM7128SQC160-15N Features
PQFP package
100 I/Os
160 pin count
160 pins
8 logic blocks (LABs)
EPM7128SQC160-15N Applications
There are a lot of Altera EPM7128SQC160-15N CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoding
- Wide Vin Industrial low power SMPS
- Storage Cards and Storage Racks
- State machine design
- Address decoders
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- TIMERS/COUNTERS
- Software-driven hardware configuration
- Pattern recognition