EPM7128SLC84-10N
| Parameters | |
|---|---|
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Length | 29.3116mm |
| Width | 29.3116mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 84-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000S |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM7128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 125MHz |
| Propagation Delay | 10 ns |
EPM7128SLC84-10N Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a 84-LCC (J-Lead) package.This device has 68 I/O ports programmed into it.There are 84 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 5V is used to power it.This part is part of the family [0].It is packaged in the way of Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.There should be a Surface Mounton the chip.The FPGA belongs to the MAX? 7000S series.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.According to the EPM7128, its related parts can be found.In digital circuits, there are 2500gates, which act as a basic building block.There are 8 logic elements/blocks.A power supply of 3.3/55Vvolts is required to operate this device.Vsup reaches 5.25Vas the maximum supply voltage.There should be a higher supply voltage (Vsup) than 4.75V.Ideally, its clock frequency should not exceed 125MHz.
EPM7128SLC84-10N Features
84-LCC (J-Lead) package
68 I/Os
The operating temperature of 0°C~70°C TA
3.3/55V power supplies
EPM7128SLC84-10N Applications
There are a lot of Intel EPM7128SLC84-10N CPLDs applications.
- Voltage level translation
- High speed graphics processing
- ON-CHIP OSCILLATOR CIRCUIT
- Power Meter SMPS
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Synchronous or asynchronous mode
- State machine control
- Bootloaders for FPGAs
- STANDARD SERIAL INTERFACE UART
- Portable digital devices