EPM7128EQI100-15
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | MAX® 7000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7128 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | EE PLD |
| Number of I/O | 84 |
| Clock Frequency | 100MHz |
| Propagation Delay | 15 ns |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
EPM7128EQI100-15 Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 100-BQFP package.There are 84 I/Os on the board.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered from a supply voltage of 5V.This part is in the family [0].Package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the MAX? 7000 series.If this device is used, you will also be able to find [0].There are related parts in [0].As a building block for digital circuits, there are 2500gates.There are 8 logic elements/blocks.The system runs on a power supply of 3.3/55V watts.In this case, the maximum supply voltage (Vsup) reaches 5.5V.The supply voltage (Vsup) should be greater than 4.5V.clock frequency should not exceed [0].
EPM7128EQI100-15 Features
100-BQFP package
84 I/Os
The operating temperature of -40°C~85°C TA
3.3/55V power supplies
EPM7128EQI100-15 Applications
There are a lot of Intel EPM7128EQI100-15 CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Dedicated input registers
- Bootloaders for FPGAs
- State machine control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PLC analog input modules
- Portable digital devices
- ToR/Aggregation/Core Switch and Router
- I/O expansion
- Page register