EPM7128BTC144-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 243.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
EPM7128BTC144-10 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a TQFP package containing it.It is equipped with 100I/O ports.There are 144 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.This part is part of the family [0].With 144pins programmed, the chip is ready to use.Additionally, this device is capable of displaying [0].For digital circuits, there are 2500gates. These devices serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.It is designed with 144 pins.There is a maximum supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.A programmable I/O count of 36 has been recorded.There is a maximum frequency of 125MHz.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.It consists of 8 logic blocks (LABs).There should be a lower maximum frequency than 243.9MHz.This kind of FPGA is composed of EE PLD.
EPM7128BTC144-10 Features
TQFP package
100 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
EPM7128BTC144-10 Applications
There are a lot of Altera EPM7128BTC144-10 CPLDs applications.
- TIMERS/COUNTERS
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Bootloaders for FPGAs
- Pattern recognition
- Multiple Clock Source Selection
- Boolean function generators
- State machine control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Interface bridging
- Address decoding