EPM7128AETC144-5
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 100 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128AETC144-5 Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a TQFP package containing it.There are 100 I/Os on the board.Devices are programmed with terminations of [0].Its terminal position is QUAD.The power source is powered by 3.3Vvolts.There is a part in the family [0].Package the chip by Bulk.In this chip, the 144pins are programmed.The device can also be used to find [0].In digital circuits, there are 2500gates, which act as a basic building block.High efficiency requires the supply voltage to be maintained at [0].EEPROM is adopted for storing data.The electronic component is mounted by Surface Mount.There are 44pins on it.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for it to operate.A total of 36 Programmable I/Os are available.A frequency of 250MHzcan be achieved.In order to operate properly, the operating temperature should be higher than 0°C.Ideally, the operating temperature should be below 70°C.In total, it contains 8 logic blocks (LABs).There should be a lower maximum frequency than 192.3MHz.Programmable logic types can be divided into EE PLD.
EPM7128AETC144-5 Features
TQFP package
100 I/Os
144 pin count
44 pins
8 logic blocks (LABs)
EPM7128AETC144-5 Applications
There are a lot of Altera EPM7128AETC144-5 CPLDs applications.
- I/O expansion
- Pattern recognition
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Digital designs
- STANDARD SERIAL INTERFACE UART
- INTERRUPT SYSTEM
- Multiple Clock Source Selection
- D/T registers and latches
- Wide Vin Industrial low power SMPS