EPM7096QC100-15
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 76 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1800 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
EPM7096QC100-15 Overview
The mobile phone network has 96 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a PQFP package.The device is programmed with 76 I/O ports.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 5V.There is a part included in Programmable Logic Devices.The chip is programmed with 100 pins.This device can also display [0].In digital circuits, 1800gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 100 pins embedded in the device.There is a maximum supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.Programmable I/Os are counted up 76.It is recommended that the operating temperature exceeds 0°C.Ideally, the operating temperature should be below 70°C.There are 6logic blocks (LABs) that make up its basic building block.There should be a lower maximum frequency than 125MHz.There are several types of programmable logic that can be categorized as EE PLD.
EPM7096QC100-15 Features
PQFP package
76 I/Os
100 pin count
100 pins
6 logic blocks (LABs)
EPM7096QC100-15 Applications
There are a lot of Altera EPM7096QC100-15 CPLDs applications.
- ROM patching
- Reset swapping
- Digital systems
- I2C BUS INTERFACE
- Portable digital devices
- High speed graphics processing
- Software Configuration of Add-In Boards
- Voltage level translation
- Cross-Matrix Switch
- Multiple Clock Source Selection