| Parameters |
| Factory Lead Time |
15 Weeks |
| Mount |
Surface Mount |
| Package / Case |
TQFP |
| Number of Pins |
44 |
| Published |
1998 |
| Part Status |
Discontinued |
| Termination |
SMD/SMT |
| Max Operating Temperature |
70°C |
| Min Operating Temperature |
0°C |
| Frequency |
125MHz |
| Number of Outputs |
68 |
| Operating Supply Voltage |
5V |
| Max Supply Voltage |
5.25V |
| Min Supply Voltage |
4.75V |
| Number of I/O |
36 |
| Memory Type |
EEPROM |
| Propagation Delay |
10 ns |
| Turn On Delay Time |
10 ns |
| Frequency (Max) |
175.4MHz |
| Number of Gates |
1250 |
| Number of Logic Blocks (LABs) |
4 |
| Speed Grade |
10 |
| Number of Macro Cells |
64 |
| Max Junction Temperature (Tj) |
105°C |
| Ambient Temperature Range High |
85°C |
| Height |
1.2mm |
| Length |
10mm |
| Width |
10mm |
| Radiation Hardening |
No |
| REACH SVHC |
No SVHC |
| RoHS Status |
RoHS Compliant |
| Lead Free |
Lead Free |
EPM7064STC44-10N Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with TQFP.It is programmed with 36 I/Os.A digital circuit can be constructed using 1250gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.There are 44 pins on the device.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.There is a maximum frequency of 125MHz.In order to operate, the temperature should be higher than 0°C.Temperatures should not exceed 70°C.Its basic building block is composed of 4 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.The device is configured with an output of [0].
EPM7064STC44-10N Features
TQFP package
36 I/Os
44 pins
4 logic blocks (LABs)
68 outputs
EPM7064STC44-10N Applications
There are a lot of Altera EPM7064STC44-10N CPLDs applications.
- TIMERS/COUNTERS
- Complex programmable logic devices
- I/O expansion
- I2C BUS INTERFACE
- Dedicated input registers
- Programmable polarity
- I/O PORTS (MCU MODULE)
- Auxiliary Power Supply Isolated and Non-isolated
- Power Meter SMPS
- Multiple Clock Source Selection