EPM7064STC44-10F
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064STC44-10F Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the TQFP package.There are 36 I/Os programmed in it.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.It is a part of family [0].Bulkshould be used for packaging the chip.It is equipped with 44 pin count.This device can also display [0].It is possible to construct digital circuits using 1250gates, which are devices that serve as building blocks.It is recommended to store data in [0].Surface Mountmounts this electronic component.There are 44 pins embedded in the device.There is a maximum supply voltage of 3.6Vwhen the device is operating.It is powered by 3Vas its minimum supply voltage.This device runs on 5Vvolts of electricity.There are 36 programmable I/Os in this system.This frequency can be achieved at 125MHz.In order to operate properly, the operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.The system consists of 4 logic blocks (LABs).The maximal frequency should be lower than 175.4MHz.It is possible to classify programmable logic as EE PLD.
EPM7064STC44-10F Features
TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064STC44-10F Applications
There are a lot of Altera EPM7064STC44-10F CPLDs applications.
- State machine control
- ROM patching
- STANDARD SERIAL INTERFACE UART
- DMA control
- ToR/Aggregation/Core Switch and Router
- Boolean function generators
- Address decoders
- Parity generators
- Address decoding
- Random logic replacement