EPM7064SLC84-6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 200MHz |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Frequency (Max) | 175.4MHz |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Number of Macro Cells | 64 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064SLC84-6 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 68 I/Os programmed in it.The 1250gates serve as building blocks for digital circuits.In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.The device has a pinout of [0].A maximum supply voltage of 3.6Vis used in its operation.A minimum supply voltage of 3V is required for it to operate.There are 68 Programmable I/Os.There can be 200MHz frequency achieved.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.Its basic building block is composed of 4 logic blocks (LABs).The fundamental building block consists of 4logic elements/cells.It is recommended that the maximum frequency be less than 175.4MHz.
EPM7064SLC84-6 Features
PLCC package
68 I/Os
84 pins
4 logic blocks (LABs)
EPM7064SLC84-6 Applications
There are a lot of Altera EPM7064SLC84-6 CPLDs applications.
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
- USB Bus
- State machine control
- State machine design
- High speed graphics processing
- Reset swapping
- Page register
- D/T registers and latches
- DMA control