EPM7064SLC44-6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7064SLC44-6 Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a PLCC package.The device is programmed with 36 I/O ports.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It belongs to the family [0].It is recommended that the chip be packaged by Bulk.There are 44 pins on the chip.If you use this device, you will also find [0].1250gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].Surface Mountis used to mount this electronic component.The device has a pinout of [0].It operates with the maximal supply voltage of 5.25V.It is powered by 4.75Vas its minimum supply voltage.It operates from 5V power supplies.A programmable I/O count of 36 has been recorded.In this case, 200MHzis the frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.A temperature lower than 70°Cis recommended for operation.There are 4logic blocks (LABs) that make up its basic building block.The maximum frequency should not exceed 175.4MHz.Types of programmable logic are divided into EE PLD.
EPM7064SLC44-6 Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064SLC44-6 Applications
There are a lot of Altera EPM7064SLC44-6 CPLDs applications.
- State machine design
- STANDARD SERIAL INTERFACE UART
- Pattern recognition
- ToR/Aggregation/Core Switch and Router
- Auxiliary Power Supply Isolated and Non-isolated
- Field programmable gate
- PULSE WIDTH MODULATION (PWM)
- Portable digital devices
- Timing control
- Handheld digital devices