EPM7064SLC44-5N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin/Copper (Sn/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 175.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | YES |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7064SLC44-5N Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As you can see, this device has 36 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.A voltage of 5V is used as the power supply for this device.This part is part of the family [0].It is packaged in the way of Bulk.A chip with 44pins is programmed.There are 1250 gates, which are devices that acts as a building block for digital circuits. It is recommended to store data in [0].Surface Mountmounts this electronic component.The pins are [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.A minimum supply voltage of 3V is required for this device to operate.It runs on 5Vvolts of power.There are 36 programmable I/Os in this system.In this case, 250MHzis the frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 4 logic blocks (LABs) in its basic building block.It is recommended that the maximal frequency be less than 0.A programmable logic type is classified as EE PLD.
EPM7064SLC44-5N Features
PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)
EPM7064SLC44-5N Applications
There are a lot of Altera EPM7064SLC44-5N CPLDs applications.
- Software Configuration of Add-In Boards
- Custom shift registers
- Auxiliary Power Supply Isolated and Non-isolated
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PULSE WIDTH MODULATION (PWM)
- Complex programmable logic devices
- Storage Cards and Storage Racks
- POWER-SAVING MODES
- Portable digital devices
- Random logic replacement