EPM7064QC100-7
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 166.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
EPM7064QC100-7 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the PQFP package.In this case, there are 68 I/Os programmed.The termination of a device is set to [0].QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 5V volts.It is a part of family [0].It has 100pins programmed.Additionally, this device is capable of displaying [0].1250gates are devices that serve as building blocks for digital circuits.Data storage is performed using [0].A Surface Mountis mounted on this electronic component.There are 100 pins embedded in the device.In this case, the maximum supply voltage is 3.6V.The device is designed to operate with a minimal supply voltage of 3VV.A power supply of 3.3/55Vis required to operate it.A total of 68programmable I/Os are available.This frequency can be achieved at 166.7MHz.There should be a temperature above 0°Cat the time of operation.Temperatures should not exceed 70°C.There are 4 logic blocks (LABs) in its basic building block.It should be below 151.5MHzat the maximal frequency.This kind of FPGA is composed of EE PLD.
EPM7064QC100-7 Features
PQFP package
68 I/Os
100 pin count
100 pins
3.3/55V power supplies
4 logic blocks (LABs)
EPM7064QC100-7 Applications
There are a lot of Altera EPM7064QC100-7 CPLDs applications.
- Code converters
- Boolean function generators
- Protection relays
- Multiple DIP Switch Replacement
- ON-CHIP OSCILLATOR CIRCUIT
- Interface bridging
- White goods (Washing, Cold, Aircon ,...)
- Complex programmable logic devices
- POWER-SAVING MODES
- DMA control