EPM7064QC100-12
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/55V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Frequency (Max) | 151.5MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 68 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| RoHS Status | RoHS Compliant |
EPM7064QC100-12 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the PQFP package.There are 68 I/Os on the board.The termination of a device is set to [0].QUADis the terminal position of this electrical part.The power supply voltage is 5V.This part is in the family [0].It is programmed with 100 pins.This device also displays [0].As a building block for digital circuits, there are 1250gates.EEPROM is adopted for storing data.This electronic part is mounted in the way of Surface Mount.The 100pins are designed into the board.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 3V is required for it to operate.It operates from 3.3/55V power supplies.A total of 68programmable I/Os are available.In this case, 125MHzis the frequency that can be achieved.It is recommended that the operating temperature exceed 0°C.Ideally, the operating temperature should be below 70°C.In total, it contains 4 logic blocks (LABs).It should be below 151.5MHzat the maximal frequency.A programmable logic type can be categorized as EE PLD.
EPM7064QC100-12 Features
PQFP package
68 I/Os
100 pin count
100 pins
3.3/55V power supplies
4 logic blocks (LABs)
EPM7064QC100-12 Applications
There are a lot of Altera EPM7064QC100-12 CPLDs applications.
- Power up sequencing
- Programmable polarity
- INTERRUPT SYSTEM
- Cross-Matrix Switch
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Page register
- ROM patching
- Custom shift registers
- Digital multiplexers
- D/T registers and latches