EPM7064AETC100-10
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | MAX® 7000A |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | EPM7064 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.33.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 68 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 1250 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.27mm |
| RoHS Status | Non-RoHS Compliant |
EPM7064AETC100-10 Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 100-TQFP package.As you can see, this device has 68 I/O ports programmed into it.There is a 100terminations set on devices.The terminal position of this electrical component is QUAD.The device is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the MAX? 7000A series.This device also displays [0].The EPM7064contains its related parts.In digital circuits, there are 1250gates, which act as a basic building block.In total, there are 4 logic elements/blocks.This device runs on 2.5/3.33.3Vvolts of electricity.In this case, the maximum supply voltage (Vsup) reaches 3.6V.The supply voltage (Vsup) should be greater than 3V.clock frequency should not exceed [0].
EPM7064AETC100-10 Features
100-TQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
2.5/3.33.3V power supplies
EPM7064AETC100-10 Applications
There are a lot of Intel EPM7064AETC100-10 CPLDs applications.
- INTERRUPT SYSTEM
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Programmable polarity
- DMA control
- PULSE WIDTH MODULATION (PWM)
- Software Configuration of Add-In Boards
- I/O PORTS (MCU MODULE)
- STANDARD SERIAL INTERFACE UART
- TIMERS/COUNTERS
- Timing control