EPM7032AETI44-7N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 138.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 44 |
| Number of Outputs | 36 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 227.3MHz |
| Architecture | PLA-TYPE |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7032AETI44-7N Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.As a result, it has 36 I/O ports programmed.44terminations have been programmed into the device.The terminal position of this electrical component is QUAD.The device is powered by a voltage of 3.3V volts.This part is in the family [0].It has 44pins programmed.A digital circuit can be constructed using 600gates.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.This board has 44 pins.With a maximum supply voltage of [0], it operates.Initially, it requires a voltage of 3Vas the minimum supply voltage.In total, there are 36programmable I/Os.The frequency that can be achieved is 138.9MHz.The operating temperature should be higher than -40°C.It is recommended that the operating temperature be lower than 85°C.The system consists of 2 logic blocks (LABs).It is recommended that the maximum frequency be less than 227.3MHz.A programmable logic type is categorized as EE PLD.It is configured with 36 output.
EPM7032AETI44-7N Features
TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
36 outputs
EPM7032AETI44-7N Applications
There are a lot of Altera EPM7032AETI44-7N CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoders
- I/O expansion
- Storage Cards and Storage Racks
- State machine design
- Auxiliary Power Supply Isolated and Non-isolated
- USB Bus
- TIMERS/COUNTERS
- Digital designs
- Protection relays