EPM570T144C3
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 5.4 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570T144C3 Overview
This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a TQFP package containing it.The device is programmed with 116 I/O ports.There are 144 terminations programmed into the device.Its terminal position is QUAD.It is powered by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.Bulkshould be used for packaging the chip.It is equipped with 144 pin count.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].It is mounted by Surface Mount.There are 144pins on it.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 2.375Vis required.Currently, there are 116 Programmable I/Os available.A frequency of 3.01205GHzcan be achieved.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be lower than 85°C.The program consists of 57 logic blocks (LABs).A fundamental building block consists of 570logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.Using the devices' 1kBmemory, programs and data can be stored.
EPM570T144C3 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144C3 Applications
There are a lot of Altera EPM570T144C3 CPLDs applications.
- Complex programmable logic devices
- DMA control
- Address decoders
- Preset swapping
- Software-Driven Hardware Configuration
- Discrete logic functions
- State machine control
- Reset swapping
- Parity generators
- White goods (Washing, Cold, Aircon ,...)