EPM570T100C4N
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2014 |
| Series | MAX® II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | EPM570 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.625V |
| Power Supplies | 1.5/3.32.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Programmable Type | In System Programmable |
| Number of I/O | 76 |
| Propagation Delay | 7 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.5V 3.3V |
| Delay Time tpd(1) Max | 5.4ns |
| Number of Logic Elements/Blocks | 570 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
EPM570T100C4N Overview
The mobile phone network has 440 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).A 100-TQFP package contains the item.As you can see, this device has 76 I/O ports programmed into it.There is a 100terminations set on devices.Its terminal position is QUAD.The device is powered by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.It operates with the operating temperature of 0°C~85°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.This type of FPGA is a part of the MAX? II series.If this device is used, you will also be able to find [0].The EPM570contains its related parts.A logic element or block has 570elements.A power supply of 1.5/3.32.5/3.3Vvolts is required to operate this device.In this case, the maximum supply voltage (Vsup) is 2.625V.It should be possible for Vsup to exceed 2.375Vat the supply voltage.
EPM570T100C4N Features
100-TQFP package
76 I/Os
The operating temperature of 0°C~85°C TJ
1.5/3.32.5/3.3V power supplies
EPM570T100C4N Applications
There are a lot of Intel EPM570T100C4N CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- DDC INTERFACE
- STANDARD SERIAL INTERFACE UART
- Digital designs
- ROM patching
- I2C BUS INTERFACE
- Bootloaders for FPGAs
- I/O expansion
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Address decoding