EPM570GT144I5N
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
EPM570GT144I5N Overview
This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].In this case, there are 116 I/Os programmed.It is programmed that device terminations will be 144 .This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 1.8V is used to power it.This part is in the family [0].With 144pins programmed, the chip is ready to use.This device can also display [0].If high efficiency is desired, the supply voltage should be kept at [0].For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.A total of 144pins are provided on this board.This device operates at a voltage of 1.89V when the maximum supply voltage is applied.A minimum supply voltage of 1.71V is required for this device to operate.There are 116 Programmable I/Os.This can be achieved at a frequency of 1.8797GHz.In order to operate properly, the operating temperature should be higher than -40°C.It is recommended that the operating temperature be lower than 100°C.In total, it contains 57 logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.There should be a lower maximum frequency than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM570GT144I5N Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570GT144I5N Applications
There are a lot of Altera EPM570GT144I5N CPLDs applications.
- ROM patching
- STANDARD SERIAL INTERFACE UART
- State machine control
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- I2C BUS INTERFACE
- Configurable Addressing of I/O Boards
- Digital systems
- Custom state machines
- PLC analog input modules
- White goods (Washing, Cold, Aircon ,...)