EPM570GT144C4
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 116 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GT144C4 Overview
A mobile phone network consists of 440macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with TQFP.The device is programmed with 116 I/O ports.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The power supply voltage is 1.8V.The part belongs to Programmable Logic Devices family.As a result, it is packaged as Bulk.Chips are programmed with 144 pins.If you use this device, you will also find [0].Optimal efficiency requires a supply voltage of [0].For data storage, FLASHis adopted.The electronic part is mounted by Surface Mount.The 144pins are designed into the board.A maximum voltage of 1.89Vis required for operation.The minimal supply voltage is 1.71V.Programmable I/Os are counted up 116.A frequency of 2.3148GHzcan be achieved.Operating temperatures should be higher than 0°C.Temperatures should not exceed 85°C.The program consists of 57 logic blocks (LABs).Basic building blocks have 570logic elements.It is recommended that the maximum frequency is less than 0.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM570GT144C4 Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570GT144C4 Applications
There are a lot of Altera EPM570GT144C4 CPLDs applications.
- Power up sequencing
- Dedicated input registers
- Synchronous or asynchronous mode
- Timing control
- Configurable Addressing of I/O Boards
- Protection relays
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Voltage level translation
- POWER-SAVING MODES
- PULSE WIDTH MODULATION (PWM)