EPM570GT100C4N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 76 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570GT100C4N Overview
440macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a TQFP package.The device is programmed with 76 I/O ports.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.Bulkshould be used for packaging the chip.Chips are programmed with 100 pins.The device can also be used to find [0].For high efficiency, the supply voltage should be maintained at [0].FLASH is adopted for storing data.Surface Mountmounts this electronic component.This board has 100 pins.There is a maximum supply voltage of 1.89V.The minimal supply voltage is 1.71V.A total of 76programmable I/Os are available.You can achieve 2.3148GHzfrequencies.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be below 85°C.It consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. It should be below 304MHzat the maximal frequency.Devices are equipped with a memory capacity of 1kBfor storing programs and data.
EPM570GT100C4N Features
TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570GT100C4N Applications
There are a lot of Altera EPM570GT100C4N CPLDs applications.
- Power up sequencing
- INTERRUPT SYSTEM
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- LED Lighting systems
- Digital systems
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Synchronous or asynchronous mode
- Handheld digital devices
- Code converters
- High speed graphics processing