EPM570GF256C5
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 256 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 1.8797GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 160 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 160 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM570GF256C5 Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device is programmed with 160 I/Os.Devices are programmed with terminations of [0].The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.It is powered by a voltage of 1.8V volts.There is a part in the family [0].Bulkshould be used for packaging the chip.It has 256pins programmed.It is also possible to find YESwhen using this device.High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].It operates at a maximum supply voltage of 1.89V volts.The device is designed to operate with a minimal supply voltage of 1.71VV.There are a total of 160 Programmable I/Os.There is 1.8797GHz frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should not exceed 85°C.In its simplest form, it consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. It is recommended that the maximum frequency be less than 304MHz.Devices contain a 1kBmemory for storing data and programs.
EPM570GF256C5 Features
FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)
EPM570GF256C5 Applications
There are a lot of Altera EPM570GF256C5 CPLDs applications.
- Reset swapping
- Boolean function generators
- I/O expansion
- Configurable Addressing of I/O Boards
- Code converters
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Complex programmable logic devices
- Auxiliary Power Supply Isolated and Non-isolated
- Multiple DIP Switch Replacement
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management