EPM570F100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 8.7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.7mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570F100C5N Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with FBGA.In this case, there are 76 I/Os programmed.There is a 100terminations set on devices.This electrical component has a terminal position of 0.It is powered from a supply voltage of 2.5V.It is a part of the family [0].The chip is programmed with 100 pins.If you use this device, you will also find [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].The electronic part is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 3.6V volts.Despite its minimal supply voltage of [0], it is capable of operating.A total of 76Programmable I/Os are present.A frequency of 304MHzcan be achieved.Ideally, the operating temperature should be greater than 0°C.A temperature below 85°Cshould be used as the operating temperature.The system consists of 57 logic blocks (LABs).A fundamental building block of logic consists of 570logic elements/cells.It is recommended that the maximal frequency be lower than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.
EPM570F100C5N Features
FBGA package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570F100C5N Applications
There are a lot of Altera EPM570F100C5N CPLDs applications.
- I/O expansion
- Code converters
- Power Meter SMPS
- TIMERS/COUNTERS
- Power automation
- Multiple DIP Switch Replacement
- Boolean function generators
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Interface bridging
- Address decoders