EPM570F100C4N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 76 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Programmable I/O | 76 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.1mm |
| Length | 11mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570F100C4N Overview
There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a FBGA package.The device has 76inputs and outputs.The termination of a device is set to [0].This electrical part is wired with a terminal position of BOTTOM.It is powered from a supply voltage of 2.5V.The part is included in Programmable Logic Devices.There are 100 pins on the chip.Additionally, this device is capable of displaying [0].High efficiency requires a voltage supply of [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.There are 100pins on it.This device operates at a voltage of 3.6Vas its maximum supply voltage.Despite its minimal supply voltage of [0], it is capable of operating.There are 76 programmable I/Os in this system.You can achieve 2.3148GHzfrequencies.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 85°Cat the time of operation.It is composed of 57 logic blocks (LABs).The fundamental building block consists of 570logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.The devices contain a memory of 1kBfor storing programs and data.
EPM570F100C4N Features
FBGA package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)
EPM570F100C4N Applications
There are a lot of Altera EPM570F100C4N CPLDs applications.
- D/T registers and latches
- PLC analog input modules
- Pattern recognition
- Field programmable gate
- Complex programmable logic devices
- Discrete logic functions
- Programmable power management
- DMA control
- High speed graphics processing
- Bootloaders for FPGAs