EPM5032PC-2
| Parameters | |
|---|---|
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T28 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Clock Frequency | 71.4MHz |
| Propagation Delay | 20 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 24 |
| Number of Product Terms | 320 |
| RoHS Status | Non-RoHS Compliant |
| Surface Mount | NO |
| JESD-609 Code | e0 |
EPM5032PC-2 Overview
There is a 28terminations set on devices.This electrical part is wired with a terminal position of DUAL.It is powered from a supply voltage of 5V.It is a part of family [0].A power supply of 5Vvolts is required to operate this device.The clock frequency of this device should not exceed 71.4MHz.The output configuration is set to [0].The product is equipped with 320terms.It is recommended that the operating temperature be kept below 70°C.The device employs 24 inputs.
EPM5032PC-2 Features
5V power supplies
16 outputs
EPM5032PC-2 Applications
There are a lot of Altera EPM5032PC-2 CPLDs applications.
- Digital systems
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- ROM patching
- LED Lighting systems
- DMA control
- Multiple DIP Switch Replacement
- Handheld digital devices
- ToR/Aggregation/Core Switch and Router
- Address decoders
- I2C BUS INTERFACE