EPM3064ATC44-10
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 125MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 222.2MHz |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1250 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Number of Macro Cells | 64 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3064ATC44-10 Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.TQFPis the package in which it resides.It is equipped with 34I/O ports.Bulkshould be used for packaging the chip.The 1250gates serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].Surface Mountis the mounting point of this electronic part.This board has 44 pins.It operates at a maximum supply voltage of 3.6V volts.In order for it to operate, a supply voltage of 3Vis required.A total of 34Programmable I/Os are present.This frequency is 125MHz.The operating temperature should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.It consists of 4 logic blocks (LABs).As a fundamental building block, there are 4 logic elements/cells.Maximum frequency should be less than 222.2MHz.
EPM3064ATC44-10 Features
TQFP package
34 I/Os
44 pins
4 logic blocks (LABs)
EPM3064ATC44-10 Applications
There are a lot of Altera EPM3064ATC44-10 CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Parity generators
- Programmable power management
- Power up sequencing
- Interface bridging
- Boolean function generators
- Timing control
- Page register
- PLC analog input modules
- POWER-SAVING MODES