EPM3032ATI44-10
| Parameters | |
|---|---|
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
EPM3032ATI44-10 Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.You can find it in package [0].As you can see, this device has 34 I/O ports programmed into it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.It is powered by a voltage of 3.3V volts.It is a part of the family [0].Bulkshould be used to package the chip.44pins are programmed on the chip.If this device is used, you will also be able to find [0].A digital circuit can be constructed using 600gates.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.There are 44 pins embedded in the device.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 3V.A total of 34 Programmable I/Os are available.A frequency of 125MHzcan be achieved.It is recommended that the operating temperature be higher than -40°C.Temperatures should not exceed 85°C.There are 2logic blocks (LABs) that make up its basic building block.If the maximal frequency is less than [0], it should be lower than that.Types of programmable logic are divided into EE PLD.
EPM3032ATI44-10 Features
TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ATI44-10 Applications
There are a lot of Altera EPM3032ATI44-10 CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Battery operated portable devices
- POWER-SAVING MODES
- DMA control
- Parity generators
- State machine control
- Auxiliary Power Supply Isolated and Non-isolated
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Timing control