EPM3032ATC44-7
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3032ATC44-7 Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a TQFP package containing it.It is equipped with 34I/O ports.There is a 44terminations set on devices.QUADis the terminal position of this electrical part.The device is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Bulkshould be used for packaging the chip.Chips are programmed with 44 pins.This device is also capable of displaying [0].A digital circuit can be constructed using 600gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data storage is performed using [0].It is mounted by Surface Mount.There are 44 pins on the device.A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 34.There can be 166.67MHz frequency achieved.There should be a temperature above 0°Cat the time of operation.The operating temperature should be lower than 70°C.The system consists of 2 logic blocks (LABs).It is recommended that the maximum frequency is less than 0.A programmable logic type is classified as EE PLD.
EPM3032ATC44-7 Features
TQFP package
34 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM3032ATC44-7 Applications
There are a lot of Altera EPM3032ATC44-7 CPLDs applications.
- I/O expansion
- Configurable Addressing of I/O Boards
- Digital designs
- Digital systems
- Preset swapping
- Wide Vin Industrial low power SMPS
- Discrete logic functions
- Code converters
- Multiple DIP Switch Replacement
- Dedicated input registers