EPM240GM100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TFBGA |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 80 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 240 |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 24 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM240GM100C5N Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).TFBGAis the package in which it resides.As you can see, this device has 80 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical component is BOTTOM.A voltage of 1.8Vprovides power to the device.It is a part of family [0].With 100pins programmed, the chip is ready to use.This device can also display [0].For high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].The electronic component is mounted by Surface Mount.A total of 100pins are provided on this board.There is a maximum supply voltage of 1.89V.The device is designed to operate with a minimal supply voltage of 1.71VV.Programmable I/Os are counted up 80.It is possible to achieve a frequency of 304MHz.The operating temperature should be higher than 0°C.There should be a temperature below 85°Cat the time of operation.The system consists of 24 logic blocks (LABs).A fundamental building block consists of 240logic elements/cells.The maximum frequency should not exceed 304MHz.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM240GM100C5N Features
TFBGA package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)
EPM240GM100C5N Applications
There are a lot of Altera EPM240GM100C5N CPLDs applications.
- INTERRUPT SYSTEM
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Power Meter SMPS
- Digital designs
- Wide Vin Industrial low power SMPS
- Protection relays
- Boolean function generators
- Cross-Matrix Switch
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Software-driven hardware configuration