EPM2210GF324C3
| Parameters | |
|---|---|
| Number of Macro Cells | 1700 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 2.2mm |
| Length | 19mm |
| Width | 19mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | FBGA |
| Number of Pins | 324 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 3.01205GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 272 |
| Nominal Supply Current | 40mA |
| Memory Type | FLASH |
| Propagation Delay | 7 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 2210 |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 221 |
| Output Function | MACROCELL |
EPM2210GF324C3 Overview
There are 1700 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.FBGAis the package in which it resides.In this case, there are 272 I/Os programmed.There is a 324terminations set on devices.BOTTOMis the terminal position of this electrical part.There is 1.8V voltage supply for this device.There is a part included in Programmable Logic Devices.The chip should be packaged by Bulk.It has 324pins programmed.If you use this device, you will also find [0].Optimal efficiency requires a supply voltage of [0].It is adopted to store data in [0].It is mounted by Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 1.89Vwhen the device is operating.It operates with the minimal supply voltage of 1.71V.A programmable I/O count of 272 has been recorded.There is 3.01205GHz frequency that can be achieved.Operating temperatures should be higher than 0°C.It is recommended to keep the operating temperature below 85°C.The system consists of 221 logic blocks (LABs).There are 2210 logic elements/cells to form a fundamental building block. A maximum frequency of less than 304MHzis recommended.The devices contain a memory of 1kBfor storing programs and data.
EPM2210GF324C3 Features
FBGA package
272 I/Os
324 pin count
324 pins
221 logic blocks (LABs)
EPM2210GF324C3 Applications
There are a lot of Altera EPM2210GF324C3 CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Protection relays
- ROM patching
- D/T registers and latches
- Page register
- Handheld digital devices
- Preset swapping
- Cross-Matrix Switch
- Programmable power management
- State machine design