EPM1270T144I5N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270T144I5N Overview
The mobile phone network has 980 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is part of the TQFP package.The device is programmed with 116 I/Os.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.Power is supplied by a voltage of 2.5V volts.This part is in the family [0].In this chip, the 144pins are programmed.When using this device, IT CAN ALSO OPERATE AT 3.3Vcan also be found.High efficiency requires a voltage supply of [0].In order to store data, FLASHis used.A Surface Mountis mounted on this electronic component.It is designed with 144 pins.There is a maximum supply voltage of 3.6V.It is powered by 2.375Vas its minimum supply voltage.The frequency that can be achieved is 304MHz.It is recommended that the operating temperature exceed -40°C.The operating temperature should be lower than 100°C.It consists of 127 logic blocks (LABs).There are 1270 logic elements/cells on the device.The maximum frequency should not exceed 304MHz.The devices contain a memory of 1kBfor storing programs and data.
EPM1270T144I5N Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270T144I5N Applications
There are a lot of Altera EPM1270T144I5N CPLDs applications.
- DDC INTERFACE
- DMA control
- Synchronous or asynchronous mode
- Pattern recognition
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- D/T registers and latches
- Parity generators
- Discrete logic functions
- ROM patching
- Software-driven hardware configuration