EPM1270M256C4N
| Parameters | |
|---|---|
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 256 |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.31481GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 212 |
| Nominal Supply Current | 55mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Programmable I/O | 212 |
| Number of Logic Blocks (LABs) | 127 |
| Output Function | MACROCELL |
EPM1270M256C4N Overview
There are 980 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device has 212inputs and outputs.256terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 2.5V.There is a part included in Programmable Logic Devices.A chip with 256pins is programmed.This device can also display [0].For high efficiency, the supply voltage should be maintained at [0].For data storage, FLASHis adopted.Surface Mountis the mounting point of this electronic part.This board has 256 pins.In this case, the maximum supply voltage is 3.6V.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.Programmable I/Os are counted up 212.A frequency of 2.31481GHzcan be achieved.It is recommended that the operating temperature exceeds 0°C.There should be a temperature below 85°Cat the time of operation.In its simplest form, it consists of 127 logic blocks (LABs).As a fundamental building block, there are 1270 logic elements/cells.The maximal frequency should be lower than 304MHz.In the devices, a memory of 1kBis provided for the storage of programs and data.
EPM1270M256C4N Features
BGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)
EPM1270M256C4N Applications
There are a lot of Altera EPM1270M256C4N CPLDs applications.
- I/O PORTS (MCU MODULE)
- PULSE WIDTH MODULATION (PWM)
- Random logic replacement
- Voltage level translation
- Battery operated portable devices
- Boolean function generators
- Field programmable gate
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- ON-CHIP OSCILLATOR CIRCUIT
- DMA control