EPM1270GT144C4N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO OPERATE AT 3.3V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 247.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 40mA |
| Number of I/O | 116 |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Logic Blocks (LABs) | 127 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.45mm |
| Length | 20mm |
| Width | 20mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM1270GT144C4N Overview
There are 980 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is packaged with TQFP.As you can see, this device has 116 I/O ports programmed into it.The device is programmed with 144 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 1.8V is used to power it.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Bulk.It is programmed with 144 pins.The device can also be used to find [0].Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.There are 144pins on it.There is a maximum supply voltage of 1.89V.The minimal supply voltage is 1.71V.A frequency of 247.5MHzcan be achieved.In order to operate, the temperature should be higher than 0°C.A temperature less than 85°Cshould be used for operation.The program consists of 127 logic blocks (LABs).As a fundamental building block, there are 1270 logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices contain a 1kBmemory for storing data and programs.
EPM1270GT144C4N Features
TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)
EPM1270GT144C4N Applications
There are a lot of Altera EPM1270GT144C4N CPLDs applications.
- Dedicated input registers
- INTERRUPT SYSTEM
- Custom state machines
- Boolean function generators
- Synchronous or asynchronous mode
- Auxiliary Power Supply Isolated and Non-isolated
- Complex programmable logic devices
- LED Lighting systems
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software Configuration of Add-In Boards