EPCS128SI16N
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | 3A991.B.1.B.1 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Interface | Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 16MB |
| Operating Supply Current | 100μA |
| Memory Type | FLASH |
| Supply Current-Max | 0.02mA |
| Frequency (Max) | 40MHz |
| Organization | 128MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.0001A |
| Memory Density | 134217728 bit |
| Endurance | 100000 Write/Erase Cycles |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPCS128SI16N Overview
This package is based on a neat SOIC package which is used by it.A data storage size of 16MB is allowed.In order for it to function, it requires a voltage supply of 3.3V.There are different functions associated with 16 terminations.16 pins are present.For the memory chip to operate, it requires a voltage not exceeding 0.02mA.There is a set of 16 pins that are included with the part.Before using the part in a circuit, it is recommended that the user apply 3.3V before the part is used in order to ensure that it runs safely and reliably in the circuit.There is a memory type that is known as a FLASH memory.For applications involving Surface Mount, it is suitable.In order to control the sliding, the controller operates at a frequency of 20MHz.The unit can operate at temperatures as low as -40°C.There should be no more than 85°C degrees of ambient temperature for it to operate.I recommend a voltage of at least 2.7V for it to run.In terms of the maximum voltage supply, it is rated with a 3.6V rating.100μA is the operating system.
EPCS128SI16N Features
FLASH memory
Frequency: 20MHz.
EPCS128SI16N Applications
There are a lot of Altera EPCS128SI16N applications of configuration proms for FPGAs.
- servers
- Camcorders
- eDRAM
- data buffer
- workstations,
- graphics card
- personal computers
- supercomputers
- hard disk drive (HDD)
- telecommunications