DT3001B
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VQFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -30°C~100°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| Type | AC DC Offline Switcher |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Max Output Current | 4A |
| Number of Channels | 1 |
| Max Output Voltage | 20V |
| Min Input Voltage | 3V |
| Max Input Voltage | 18V |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Dimming | Analog, TRIAC |
| Switching Frequency | 850kHz |
| Voltage - Supply (Max) | 230VAC |
| Voltage - Supply (Min) | 120VAC |
| Nominal Input Voltage (DC) | 12V |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
DT3001B Overview
In order to save board space, the led driver uses the 12-VQFN Exposed Pad package. These LED drivers have 4 outputs.To mount, use Surface Mount.With high efficiency and reliable performance, it emerges as a AC DC Offline Switcher.The led light driver is capable of operating at the operating temperature of -30°C~100°C TA.It operates using 12 terminations.The base of this board is configured as 8 pins.If the voltage supply is less than 120VAC, undetermined failures will occur.It has been mounted on Surface Mount.There is an optimization that allows a maximum supply voltage of 230VAC.At a voltage of 3V, it operates at a minimal input voltage.In terms of supply current, there is a maximum value of 18V.Having the switching frequency at 850kHz enables this electronic component to perform at its best.LED drivers deliver all their benefits with a maximum output current of 4A.It is recommended that the output voltage be no higher than 20V.-300mV is the minimal voltage it outputs.There are 1 transmission channels available.
DT3001B Features
Available in the 12-VQFN Exposed Pad package
Operating temperature of -30°C~100°C TA
Switching frequency of 850kHz
DT3001B Applications
There are a lot of Seoul Semiconductor Inc. DT3001B LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- Industrial LED Lighting: Image Recognition Devices
- Scanners and Handy Terminals
- Museum lighting
- High-end retail lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Gallery lighting
- OLED power supply for portable equipment