DSPIC33FJ64MC804-I/PT
| Parameters | |
|---|---|
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ64MC804 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b; D/A 6x16b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1mm |
| Length | 10mm |
DSPIC33FJ64MC804-I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. Surface Mount is used for mounting. This item can be found in package Tray. There is a dsPIC as core processor in this device. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. The device has 35 I/Os. To find comparable components, use the DSPIC33FJ64MC804 base part number. The terminals are positioned at QUAD. It consists of 44 terminationals. It is a member of the dsPIC? 33F series of electrical components. High efficiency is possible due to the 3.3V supply voltage. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. There are 44 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. A total of 44 pins are attached to it. It falls under the category of Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 64kB. The maximum supply current is 76mA. It performs extremely well at a frequency of 40MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. It appears that there are 5 timers/counters in use. The oscillator type Internal is used to operate the device.
DSPIC33FJ64MC804-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ64MC804-I/PT Applications
There are a lot of Microchip Technology DSPIC33FJ64MC804-I/PT Microcontroller applications.
- Set-top boxes
- Hard drives
- Temperature sensing and controlling devices
- Teletext terminals
- Microwave ovens
- Safety -airbags, automatic braking system (ABS)
- Virtual reality VR robots
- Television
- Electronic jamming systems
- Laminators