DSPIC33FJ32MC302-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Base Part Number | DSPIC33FJ32MC302 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, QEI, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 6 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC33FJ32MC302-I/SP Overview
To save space, it is included in the 28-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. There is a Tube package available for it. It is equipped with a dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 21 I/Os on it, which makes it a very simple device. It has a base part number of DSPIC33FJ32MC302 that can be used to find other components that are comparable. This device has terminals at DUAL. It has 28 terminationals. It is a member of the dsPIC? 33F series of electrical components. The supply voltage of 3.3V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A number of 28 pins are used to construct it. This mount is done in accordance with the method of Through Hole. This device has a total of 28 pins. It is one of the components included in Digital Signal Processors. The devices have a maximum memory size of 32kB that can be used to store programs and data. Using a frequency of 40MHz, it is very efficient. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. There are 3 timers/counters. Internal is the oscillator type it uses.
DSPIC33FJ32MC302-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33FJ32MC302-I/SP Applications
There are a lot of Microchip Technology DSPIC33FJ32MC302-I/SP Microcontroller applications.
- Industrial instrumentation devices
- Switches
- Aerospace navigation systems
- Toasters
- DCS control intelligent sensor
- Process control devices
- Home video and audio
- Petrochemical
- Smoke alarms
- Ipad