DSPIC33FJ32GP302-I/SO
| Parameters | |
|---|---|
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 75mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| Number of A/D Converters | 1 |
| Format | FLOATING-POINT |
| Number of PWM Channels | 4 |
| Height | 2.31mm |
| Length | 17.87mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 2 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | dsPIC™ 33F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33FJ32GP302 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
DSPIC33FJ32GP302-I/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. Tube is the package that contains it. The device has a dsPIC core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. 21 I/Os can be found on it. To find equivalent components, use its DSPIC33FJ32GP302 base part number. A DUAL position is assigned to its terminals. As far as terminations are concerned, there are 28 terminations present. There are a number of electrical components in the dsPIC? 33F series, including this one. Because of the 3.3V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 28 pins. Mounting is performed in accordance with Surface Mount. On it, there are 28 pins. This component is a part of Digital Signal Processors. In the device, there is a memory capacity of 32kB which may be used to store programs and data. Supply current is maximum at 75mA. It is highly efficient when it works at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. There are 3 timers/counters. An oscillator type Internal is required for it to work.
DSPIC33FJ32GP302-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33FJ32GP302-I/SO Applications
There are a lot of Microchip Technology DSPIC33FJ32GP302-I/SO Microcontroller applications.
- Radio
- Hand-held metering systems
- Guidance-GPS
- Petrochemical
- Switches
- Sonography (Ultrasound imaging)
- Blood pressure monitors
- DDC control
- Toys
- Ipad