DSPIC30F6015-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6015 |
| Pin Count | 64 |
| Lead Pitch | 500μm |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6015-30I/PT Overview
There is a 64-TQFP package available to save space. Using Surface Mount, it is mounted. It is available in the Tray package. Devices with dsPIC core processors are available. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 52 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of DSPIC30F6015. QUAD is the position of its terminals on the board. A 64 termination is contained within it. There are a number of electrical components in the dsPIC? 30F series, including this one. Using the 5V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed using 64 pins. Based on the Surface Mount method, it is mounted. It is equipped with 64 pins in total. This is a component included in Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 144kB. At a frequency of 30MHz, it exhibits excellent efficiency. It appears that there are 5 timers/counters in use. Using a Internal oscillator type, it works well.
DSPIC30F6015-30I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6015-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F6015-30I/PT Microcontroller applications.
- Dryers
- Routers
- Heart rate monitors
- Home video and audio
- Information appliances (networking of household appliances)
- Smartphone
- Wastewater treatment
- Paper shredders
- Switches
- Sonography (Ultrasound imaging)