DSPIC30F5011-20E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3V MINIMUM SUPPLY AT 10 MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F5011 |
| Pin Count | 64 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 96kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 66KB 22K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F5011-20E/PT Overview
As a result, it is available in the 64-TQFP package. Using Surface Mount, it is mounted. This item can be found in package Tray. Device with dsPIC core processor issupported. Working at -40°C~125°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. 52 I/Os can be found on it. A component with the same part number as DSPIC30F5011 can be compared to other similar components. At QUAD, its terminals are located. A 64 termination is contained within it. There are a number of electrical components in the dsPIC? 30F series, including this one. Using the 5V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 64 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. It has a total of 64 pins on it. The component is included in Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 96kB. The system is highly efficient when working at a frequency of 20MHz. 5.5V offers full adaptability and voltage supply when it is employed by designers. 5 counters/timers are currently active. It has the property of ALSO OPERATES AT 3V MINIMUM SUPPLY AT 10 MHZ as well. Using an oscillator type of Internal, it works.
DSPIC30F5011-20E/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F5011-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F5011-20E/PT Microcontroller applications.
- DCS control intelligent sensor
- Digital cameras
- Smoke alarms
- Answering machines
- Hearing aids
- Volt meter
- Sonography (Ultrasound imaging)
- Calculators
- Television
- Graphic terminals