DSPIC30F3010-30I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | DSPIC30F3010 |
| Pin Count | 28 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 24kB |
| Oscillator Type | Internal |
| Number of I/O | 20 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 24KB 8K x 24 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 192 kb |
| EEPROM Size | 1K x 8 |
| Format | FIXED-POINT |
| RAM (words) | 512 |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F3010-30I/SP Overview
There is an option to purchase it in the 28-DIP (0.300, 7.62mm) package, which saves space. A Through Hole mounting method is used. Package Tube contains it. It is equipped with a dsPIC core processor. During work, the temperature should remain at -40°C~85°C TA. Memory type FLASH is used for program memory. 20 I/Os are present on the device. Based on its base part number of DSPIC30F3010, other similarly-sized components can be found. DUAL is the location of its terminals. 28 terminationals are present. It is a member of the dsPIC? 30F series of electrical components. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 28 pins are used to construct it. During the mounting process, the device is mounted based on the Through Hole method. This device has a total of 28 pins. It falls under the category of Digital Signal Processors. A device with a memory size of 24kB can store programs and data. Using a frequency of 30MHz, it is very efficient. In total, there are 5 timers and counters. The oscillator type Internal is used to operate the device.
DSPIC30F3010-30I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC30F3010-30I/SP Applications
There are a lot of Microchip Technology DSPIC30F3010-30I/SP Microcontroller applications.
- DCS control intelligent sensor
- Coffee machines
- Ipad
- Hand-held metering systems
- Routers
- Smoke alarms
- Oscilloscopes
- Graphic terminals
- Sonography (Ultrasound imaging)
- Torpedo guidance