DS3882E+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | CCFL Controller |
| Terminal Finish | MATTE TIN |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 40kHz~100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Input Voltage-Nom | 5V |
| Current - Supply | 12mA |
| Input Voltage (Min) | 4.75V |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Dimming | Yes |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DS3882E+ Overview
Materials used in packaging are those of Tube.It's no secret that electronic manufacturers are attracted to the 28-TSSOP (0.173, 4.40mm Width)'s low package cost.The PCB is mounted by using Surface Mount.In standard grade applications, it is considered Type CCFL Controller.In order to ensure its proper operation, a power supply voltage is supplied to it.The -40°C~105°C setting should always be used.The device still operates accurately at 40kHz~100kHz frequency.The 28-terminations are built into it.This system operates on 12mA's supply current.It runs in 2 mode.There are 28 pins total in its sum.4.75V is the minimum input voltage required to operate it.It is possible to provide an input voltage maximum of 5.25V.
DS3882E+ Features
Mounting type of Surface Mount
DS3882E+ Applications
There are a lot of Rochester Electronics, LLC DS3882E+ Lighting Controllers applications.
- DC link
- Flashtube ignition
- Voltage doubling
- Frequency converters
- To reduce power noise & signal noise
- Noise filtering
- UPS buffering
- DC/DC, DC/AC, and AC/AC converters
- Coupling or blocking
- DC buffering