DS2114Z
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | SCSI, SE |
| Resistance | 116Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Terminators |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS2114 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Nominal Supply Current | 250mA |
| Differential Output | NO |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 110Ohm |
| Height Seated (Max) | 1.75mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS2114Z Overview
A transmission line may also have 9 terminations, which are made using devices matched to its characteristic impedance. Because of its low package cost, the 16-SOIC (0.154, 3.90mm Width) is widely used in the electronic industry. Tube's packaging follows his material specifications. Surface Mount allows mounting of PCBs. A temperature greater than 0°C~70°C should not be used as the operating temperature. This material is SCSI, SE-qualified for use in standard applications. Normal operation is ensured with a 4V~5.5V Supply Voltage. For finding related parts, you can use Base Part Number DS2114. For specific uses, 16 pins are included. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. Optimal efficiency requires a supply voltage of 5V. On the back is a Surface Mount-mount. There is a place for it in Subcategory Bus Terminators. Operating 5V Power Supplies is required. This device has a resistance of 116Ohm (Ω). A current supply must be provided to 5.5V so that it can function properly.
DS2114Z Features
9 terminations
Tube package
DS2114 family
16 pin count
9 signal lines
5V power supplies
DS2114Z Applications
There are a lot of Maxim Integrated DS2114Z Signal Terminators applications.
- Compact disk drives
- Notebooks
- Telecommunication Equipment
- tape drives
- USB hubs
- Data Networking
- Remote input module
- Data Routers
- SCSI cable
- Optical disk drives