DRV8873SPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Automotive, Industrial |
| Technology | NMOS |
| Voltage - Supply | 0V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8873 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 38V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 10A |
| Voltage - Load | 4.5V~38V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DRV8873SPWPRQ1 Description
DRV8873SPWPRQ1 is an integrated driver IC for driving a brushed DC motor in automotive applications. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that drive motors bi-directionally with up to 10-A peak current. The device operates from a single power supply and supports a wide input supply range from 4.5 V to 38 V.
A PH/EN or PWM interface allows simple interfacing to controller circuits. Alternatively, independent half-bridge control is available to drive two solenoid loads.
Integrated current sensing provides an output current proportional to the motor load current of both hide-side FETs without the need for high-power sense resistors. This can be used to detect motor stall or change in load conditions.
DRV8873SPWPRQ1 Features
AEC-Q100 qualified for automotive applications
Device temperature grade 1: –40°C to +125°C, TA
N-channel H-bridge motor driver
Drives one bidirectional brushed DC motor
Two unidirectional brushed DC motors
Solenoids or other resistive and inductive loads
4.5-V to 38-V Operating voltage range
10-A Peak current drive
Integrated current sensing
Proportional current output (IPROPI)
DRV8873SPWPRQ1 Applications
? Electronic throttle control
? Exhaust gas recirculation
? Side-view mirror tilt
? e-Shifter
? Air-flow diverter valve control
DRV8873SPWPRQ1 is an integrated driver IC for driving a brushed DC motor in automotive applications. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that drive motors bi-directionally with up to 10-A peak current. The device operates from a single power supply and supports a wide input supply range from 4.5 V to 38 V.
A PH/EN or PWM interface allows simple interfacing to controller circuits. Alternatively, independent half-bridge control is available to drive two solenoid loads.
Integrated current sensing provides an output current proportional to the motor load current of both hide-side FETs without the need for high-power sense resistors. This can be used to detect motor stall or change in load conditions.
DRV8873SPWPRQ1 Features
AEC-Q100 qualified for automotive applications
Device temperature grade 1: –40°C to +125°C, TA
N-channel H-bridge motor driver
Drives one bidirectional brushed DC motor
Two unidirectional brushed DC motors
Solenoids or other resistive and inductive loads
4.5-V to 38-V Operating voltage range
10-A Peak current drive
Integrated current sensing
Proportional current output (IPROPI)
DRV8873SPWPRQ1 Applications
? Electronic throttle control
? Exhaust gas recirculation
? Side-view mirror tilt
? e-Shifter
? Air-flow diverter valve control