DRV8860PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | NMOS |
| Voltage - Supply | 8V~38V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | DRV8860 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 8 |
| Interface | SPI |
| Operating Supply Current | 3mA |
| Output Configuration | Low Side (8) |
| Current - Output | 200mA |
| Logic Function | AND |
| Voltage - Load | 8V~38V |
| Output Peak Current Limit-Nom | 0.566A |
| Drain to Source Resistance | 1.5Ohm |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8860PWR Overview
Drivers controllers is designed with Tape & Reel (TR) package.This part is packaged with a case of [0].In general, it is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.The device is capable of supplying a voltage of 8V~38V volts.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.A Brushed DCmotor can be classified as a type of motor.In this case, the voltage can be applied to the load at the rate of 8V~38V.The recommended mounting method is Surface Mount.Keep the part output current at 200mA.This can be determined by looking at the DRV8860 part number.16pins are used in its design.There are a total of 8outputs available.3mAis the supply current used for its operation.
DRV8860PWR Features
Applications : General Purpose
Load voltage across the chip 8V~38V
base on DRV8860 number
designed with 8 outputs
DRV8860PWR Applications
There are a lot of Texas Instruments DRV8860PWR motor drivers applications.
- Daytime running lights (DRLs)
- Accurate LED current matching
- RGB and monochromatic LED drivers for signage and traffic signals
- Hazardous application
- CHMSL (center high-mount stop lamps)
- Industrial high-bay lights
- Brake lights
- General lighting
- Dome
- Home lighting systems