DRV8825PWP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Tolerance | 20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Voltage - Rated | 100V |
| Capacitance | 47μF |
| Subcategory | Motion Control Electronics |
| Voltage - Rated DC | 100V |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8825 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Lead Pitch | 3.5mm |
| Output Voltage | 3.3V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 5mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 2.5A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 1.8A |
| Voltage - Load | 8.2V~45V |
| Switching Frequency | 30kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Diameter | 8mm |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8825PWP Description
DRV8825PWP provides an integrated motor driver solution for printer scanners and other automation equipment applications. The device has two H-bridge drivers and a micro-step divider designed to drive bipolar stepper motors. The output driver block consists of an N-channel power MOSFET configured as a full H-bridge to drive the motor winding. DRV8825 can drive up to 2.5 amperes per output (appropriate heat dissipation at 24 volts and 25 °C).The simple step / DIR interface allows easy connection to the controller circuit. The mode pin allows the motor to operate continuously in a full-step to 1-step 32-step mode. Falloff modes can be configured to use slow falloff, fast falloff, or mixed falloff. A low power sleep mode is provided, which closes the internal circuit to achieve very low static current consumption. The hibernation mode can be set using the designed nSLEEP pin.With over-current, short-circuit, under-voltage locking, high temperature and other internal shutdown functions. The fault status is indicated by the nFAULT pin.
DRV8825PWP Features
PWM Microstepping Stepper Motor Driver -Built-In Microstepping Indexer -Upto1/32Microstepping
Multiple Decay Modes
Mixed Decay
Slow Decay
-Fast Decay
8.2-V to 45-V Operating Supply Voltage Range
2.5-A Maximum Drive Current at 24 Vand TA=25C
Simple STEP/DIR Interface
Low Current Sleep Mode
Built-In 3.3-V Reference Output
Small Package and Footprint
Protection Features
-Overcurrent Protection(OCP) -Thermal Shutdown(TSD)
-VM Undervoltage Lockout(UVLO
-Fault Condition indication Pin(nFAULT)
DRV8825PWP Applications
Automatic Teller Machines
Money Handling Machines
Video Security Cameras
Printers
Scanners
Office Automation Machines
Gaming Machines
Factory Automation
Robotics