DRV8804PWP
| Parameters | |
|---|---|
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Base Part Number | DRV8804 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 60V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | SPI |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Low Side (4) |
| Current - Output | 1A |
| Supply Current-Max (Isup) | 2.1mA |
| Voltage - Load | 8.2V~60V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
DRV8804PWP Overview
There is a Tubepackage included in the design.Drivers controllers comes in a 16-PowerTSSOP (0.173, 4.40mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.There is a possibility of providing 8.2V~60Vvolts through the device.This device operates at a temperature of -40°C~150°C TJ.A Brushed DCmotor can be classified as a type of motor.This part has 16termination options.You can apply voltage at 8.2V~60Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 24Vsetting.Ideally, it should be mounted in the Surface Mountposition.Maintain a 1Aoutput current for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.The DRV8804part number allows us to locate it.16pins are present on the device.There are a total of 4outputs available.
DRV8804PWP Features
Applications : General Purpose
Load voltage across the chip 8.2V~60V
base on DRV8804 number
designed with 4 outputs
DRV8804PWP Applications
There are a lot of Texas Instruments DRV8804PWP motor drivers applications.
- Accurate LED current matching
- Charge pump circuits
- Daytime running lights (DRLs)
- LED bias
- PWM generators
- Human-centric lighting
- Tunnel lights
- Hazardous application
- LED ballasts
- Commercial office