DRV135UAG4
| Parameters | |
|---|---|
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Pre-Amplifier, Professional Audio |
| Voltage - Supply | ±4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 18V |
| Base Part Number | DRV135 |
| Function | Line Driver |
| Operating Supply Voltage | 18V |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Interface | Analog |
| Nominal Supply Current | 5.2mA |
| Quiescent Current | 5.2mA |
| Slew Rate | 15 V/μs |
| Common Mode Rejection Ratio | 46 dB |
| Input Offset Voltage (Vos) | 10mV |
| Differential Output | YES |
| Voltage Gain | 6dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Specifications | Differential Output |
| Gain | 6 dB |
| Input Characteristics | STANDARD |
| Max Dual Supply Voltage | 18V |
| Driver Number of Bits | 1 |
| Min Dual Supply Voltage | 4.5V |
| Negative Supply Voltage-Nom | -18V |
| Supply Voltage1-Nom | 18V |
| Out Swing-Min | 20 V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
DRV135UAG4 Overview
The book is also accompanied by a case, which only adds to the value of the book. It is recommended that you mount it in a Surface Mount mounting type. I have embedded a 8-SOIC (0.154, 3.90mm Width) case with it in order to protect it. A 1 channel is present on the device. There are Line Driver functions included in this part for your reference. The device can be applied in Pre-Amplifier, Professional Audio. As far as I know, it is supplied within ±4.5V~18V days. -55°C~125°C TA is the range of temperature for this device. On the chip, there are 8 terminations. You can find similar parts by searching for the DRV135 family. In order to better understand the specifications of the device, please refer to the following details: Differential Output. The chip has 8 pins. As you can see, Surface Mount has mounted it. In a 18V-volt supply voltage, the chip conducts. There is a voltage range of 18V that it can handle. It is important to keep the voltage gain at 6 dB. A device's resistance should be within the range of 10kOhm.
DRV135UAG4 Features
With 8-SOIC (0.154, 3.90mm Width) channels
operate temperature at the range of -55°C~125°C TA
Supply voltage at 18V volts
stay resistance at 10kOhm
DRV135UAG4 Applications
There are a lot of Texas Instruments DRV135UAG4 Audio Special Purpose applications.
- DIGITAL AUDIO WORKSTATIONS
- Distribution Amplifiers
- AV/DVD Receiver, AV Amplifier
- Musical Instruments
- computer and automotive audio systems
- effects processors
- DIGITAL MICROPHONES
- Telecom Systems
- Graphic and P arametric Equalizers
- DIGITAL MIXING CONSOLES