DRV10963JMDSNT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Fan Motor Driver |
| Technology | Power MOSFET |
| Voltage - Supply | 2.1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV10963 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Min (Vsup) | 2.1V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Current - Output | 500mA |
| Voltage - Load | 2.1V~5.5V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 600μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 550μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV10963JMDSNT Overview
The design includes a package of type [0].This part is packed in a 10-UFDFN Exposed Pad case.Mounting the part by Surface Mountis recommended.The component connected in Fan Motor Drivermatches it perfectly.In this case, the device can supply 2.1V~5.5V volts.A range of -40°C~125°C TJis available for operating temperature.The motor type can be classified as Brushless DC (BLDC).The part supports 10terminations.Drivers controllers is possible to apply voltage at a rate of 2.1V~5.5Vto the load.Drivers controllers is important to remember that this amplifier should be run at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a current of 500mAfor the part output.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.DRV10963is the part number that finds it.A device with 10pins is available.Drivers controllers operates from a voltage of 5.5V volts.
DRV10963JMDSNT Features
Applications : Fan Motor Driver
Load voltage across the chip 2.1V~5.5V
base on DRV10963 number
DRV10963JMDSNT Applications
There are a lot of Texas Instruments DRV10963JMDSNT motor drivers applications.
- Fog lamps
- Daytime running lights (DRLs)
- Monitoring the energy that the luminaire uses
- Digital still cameras
- CHMSL (center high-mount stop lamps)
- LED bias
- Turn signals
- Lighting for the ambience of tunability
- Street lights
- Camera-enabled smartphones